•Warm air hand dryer.
•Sensor operated.
•Maximum power and airflow.
•Maximum robustness and vandal-proof.
•Suitable for very high traffic facilities.
•It normally goes along with a soap dispenser.
*
Components and Materials
• Steel one-piece cover chromed bright finish, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow ® wrench.
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal brush motor, 5.500 rpm, F class, which includes a safety thermal cut-off.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a thermal cut-off.
• 360º Nozzle in chrome plated zamak.
• Electronic detection sensor.
* Technical Specifications
Voltage
220-240
V
Frequency
50/ 60
Hz
Electrical isolation
clase I
Dimensions
248 x 278 x 212
mm
Weight
6,5
Kg
Effective airflow
330 m3/h/
5500 l/min
Nominal airflow
470 m3/h /
7800 l/min
Air velocity
96
Km/h
Total power
2250
W
Motor power
250
W
Heating element power
2000
W
Consumption
10
A
RPM
5500
Air temperature(10 cm distance / 21 ºC)
53
ºC
Noise level (at 2 m)
70
dB
Protection level
IP23
29
*
Operation
Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.
Web
design by NeoInteractiva