|
 |
|
|
| |
Code:
SC0085H -
Saniflow push-button operated cast iron cover |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Warm air hair dryer.
• Push-button operated.
• Maximum robustness and vandal-proof.
• Suitable for very high traffic facilities.
• It normally goes along with a soap dispenser
|
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Cast iron one-piece cover with white porcelain enamelled coating, 6 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® key wrench.
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal motor, 5.500 rpm, B class, included a 2 A fuse with sealed and self-lubricated ball bearings.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a thermal-overload switch at 80 ºC.
• Nozzle in chrome plated zamak, 22 μ thick.
• Push -button in chrome plated zamak, 22 μ thick, that activates an electromechanical timer with a 90 seconds cycle.
|
|
|
|
|
|
| |
*
Operation |
|
| |
Press the button to initiate the drying process. The dryer will go on with no interruption for 90 seconds. Please direct the nozzle to the hair at your own convenience. |
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000, CE, AENOR, VDE, GOST. Compliant with electrical safety directives 73/23/CEE & 93/68/CEE and electro-magnetic compatibility directives 89/336/CEE & 92/31/CEE. |
|
|
|
|
|
| |
*
Specification |
|
| |
Surface mounted vandal resistant warm air hair dryer shall be fabricated with one-piece 6 mm thick cast iron cover, white porcelain enameled coating, and fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow® key wrench. The back base shall be aluminium, 3 mm thick and with 4 holes Ø 8 mm for wall mounting. The nozzle, with an airflow diameter of 57 mm, should be equipped with a 1,5 thick zamak grill to make the inside components inaccessible. The dryer shall be activated using the chrome-plated zamak 22 μ thick push button, that activates an electromechanical timer with a 90 second cycle before switching dryer off automatically. Motor shall be 250 W, 5.500 rpm, universal type, on resilient mounting, B class, with 2 A fuse with sealed, self- lubricated ball bearing. The waved wire NiCr heating element mounted on a mica frame should be located inside the fan scroll, and should incorporate a thermal-overload switch which will disconnect at 80 ºC. The fan wheel should be an aluminium centrifugal with double symmetrical inlet, and the fan scroll shall be made of a fire resistant plastic UL 94-V0. Dryer shall deliver 330 m3/h of air at 53 ºC and 96 Km/h velocity during user controlled drying cycle. The dryer shall have a total power of 2.250 W with a consumption of 10 A. Noise level should be 70 dB at 2 m distance. Protection level against water splashes should be rating IP21. Overall dimensions shall be 255 x 282 x 215 mm. Unit shall be VDE approved and CE marked and comply with electrical safety directives 73/23/CEE & 93/68/CEE and electromagnetic compatibility directives 89/336/CEE & 92/31/CEE.
Surface mounted warm air hair dryer shall be model SC0085H, push-button operated cast iron, white enamelled cover, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
