|
 |
|
|
| |
Code:
DJ0030C -
Vertical, wall mounted stainless steel AISI 304 bright finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Liquid soap dispenser, wall mounted.
• Push-button operated.
• Robust and vandal-resistant.
• Suitable for high traffic facilities.
• Model suitable for public use.
• It normally goes along with a warm air hand dryer. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Stainless steel AISI 304 body, top filling lid and push-button, 0,8 mm thick, bright finish. It is mounted on the wall by means of 4 wood screws with their corresponding 5 mm wall plugs (the lower ones attach the dispenser, whilst the upper ones fix it to the wall) (screws and wall plugs are provided).
• Anti-dripping and anti-corrosion valve. Design based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness.
• Thermoplastic container, 3 mm thick. Access to its interior using a standard mediclinics ® key supplied.
• Stainless steel AISI 302 springs.
• Housing with 1 viewing slot.
• Suitable soaps: Hand soaps, with neutral PH, not containing chlorine. |
|
|
|
|
|
| |
*
Operation |
|
| |
Press push-button manually to dispense a measured amount of liquid soap. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist. |
|
|
|
|
|
| |
*
Specification |
|
| |
Wall mounted soap dispenser, robust and vandal-resistant with a body, top filling lid and push-button made of stainless steel AISI 304, 0,8 mm thick, bright finish. It should be mounted on the wall by means of 4 wood screws with their corresponding 5 mm wall plugs; the lower ones attach the dispenser, whilst the upper ones fix it to the wall. The dispenser should include an anti-dripping and anti-corrosion valve which is based on a polyamide piston with 2 elastomeric toroidal gaskets, silicone blocking pivot and stainless steel ball to ensure tightness. The thermoplastic container should be 3 mm thick and the access to its interior should be using a standard mediclinics ® key supplied. The dispenser should be provided with stainless steel AISI 302 springs and housing with 1 viewing slot. The soap dispenser should be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for surgical soaps. Overall dimensions shall be 206 x 117 x 116 mm.
Liquid soap dispenser shall be model DJ0030C, stainless steel AISI 304 bright finish, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
