|
 |
|
|
| |
Code:
DJ0110C -
Vertical, wall mounted stainless steel AISI 304 bright finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
Liquid soap dispenser, wall mounted.
Push-button operated.
Robust and vandal-resistant.
Suitable for high traffic facilities.
Model suitable for public use.
It normally goes along with a warm air hand dryer. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
Stainless steel AISI 304 one-piece container, 0,5 mm thick, bright finish It is mounted on the wall by concealed vandal-resistant stainless steel wall plate with 4 sheet-metal screws and 3 mm wall plugs (screws and wall plugs are provided). To refill, hinged lid opens for top filling only with special key provided.
Chromed lid, access to its interior using a special key supplied.
Termo plastic chromed brass, push-button.
Thermoplastic container ABS, 3 mm thick.
Chromed ABS push-in valve, with interior gaskets, to ensure tightness.
Stainless steel spring.
Anti-dripping and anti-corrosion valve. Design based on a polyamide piston.
Housing with 4 top to bottom viewing slots.
Suitable soaps: Hand soaps, with neutral PH, not containing chlorine. |
|
|
|
|
|
| |
*
Operation |
|
| |
Press push-button manually to dispense a measured amount of liquid soap. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist. |
|
|
|
|
|
| |
*
Specification |
|
| |
Wall mounted soap dispenser, robust and vandal-resistant with a body, made of stainless steel AISI 304, 1 mm thick, bright finish. It is mounted on the wall by concealed vandal-resistant stainless steel wall plate with 4 sheet-metal screws and 3 mm wall plugs (screws and wall plugs are provided). To refill, hinged lid opens for top filling only with special key provided.The dispenser should include a chrome brass push-button, ABS thermoplastic piston and a chromed ABS push-in valve, with interior gaskets, to ensure tightness. The dispenser housing should be provided with 4 top to bottom viewing slots. The soap dispenser should be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for surgical soaps. Overall dimensions shall be 165 x 80 x 155 mm.
Liquid soap dispenser shall be model DJ0110C, stainless steel AISI 304 bright finish, of Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.
|
|
|
|
|
|
|
