|
 |
|
|
| |
Code:
DJ0515F -
Vertical, wall mounted ABS fumé / chromed + ash tray |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Liquid soap dispenser, wall mounted with ash tray.
• Pull-button operated.
• Robust.
• Suitable for high traffic facilities.
• Model suitable for public use.
• It normally goes along with a warm air hand dryer. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Thermoplastic ABS container, 4 mm thick, fumé colour, removable. It is mounted on the wall by a plastic wall plate by means of 4 wood screws with their corresponding 6 mm wall plugs (screws and wall plugs are provided). It can be filled with commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents.
• Chromed finish thermoplastic ABS top filling lid. To refill, lid opens for top filling only with special key provided. Included slots for cigarettes.
• Chromed thermoplastic ABS pull-button type.
• Anti-dripping and anti-corrosion negative pressure pumping valve.
• Heavy duty nylon pump.
• Liquid soaps allowed: All, except for surgical soaps. |
|
|
|
|
|
| |
*
Operation |
|
| |
Pull lever manually to dispense a measured amount of liquid soap. Valve is operable with one hand, without tight grasping, pinching, or twisting of the wrist. |
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000. |
|
|
|
|
|
| |
*
Specification |
|
| |
Wall mounted liquid soap dispenser shall be chromed thermoplastic ABS container, 4 mm thick, fumé colour, removable. Shall be mounted on the wall by a plastic wall plate by means of 4 wood screws with their corresponding 5 mm wall plugs (screws and wall plugs are provided). Shall be filled with commercially marketed all purpose liquid and lotions hand soaps and synthetic detergents with chromed thermoplastic ABS top filling lid and chromed thermoplastic ABS pull-button. To refill, lid opens for top filling only with special key provided. The dispenser should include an anti-dripping and anti-corrosion negative pressure pump which is based on heavy duty nylon. The soap dispenser should be suitable for commercially marketed all purpose liquid and lotion hand soaps and synthetic detergents except for surgical soaps. Overall dimensions shall be 215 x 140 x 120 mm.
Liquid soap dispenser shall be model DJ0515F, ABS fumé, white ABS, of Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
