|
 |
|
|
| |
Code:
PR0783CS -
Surface mounted, 250/300 m industrial rolls stainless steel AISI 304 satin finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Toilet paper dispenser for industrial rolls of 250/300 m, surface mounted, stainless steel AISI 304 satin finish.
• Manual dispensing.
• Robust and vandal-proof.
• Suitable for very high traffic facilities.
• Model suitable for public use.
• It generally goes along with a toilet brush and waste receptacle, stainless steel AISI 304 satin finish, complemented by a warm air hand dryer. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Stainless steel AISI 304 one-piece body, 0,8 mm thick, round Ø 250 mm, fully sealed and with a catch system to prevent the opening of the door, satin finish. The supports of the screws in the back of the appliance, are acting as an anti-moisture support, as well as slots to avoid the screws damaging the toilet paper. It is mounted on the wall by means of 3 wood screws with their corresponding 5 mm wall plugs. It includes a lock system with standard mediclinics ® key, that allows opening the lid for replenishment.
• Stainless steel AISI 304 axis, 0,8 mm thick, for standard 45 mm paper roll tube, with inertial anti-spin retainer. The axis allows the use of a standard paper roll in case of need.
• Stainless steel AISI 304 one-piece seamless lid, 0,8 mm thick, satin finish, fully sealed. Fixed to the body by means of rivets that allows swinging down of the lid for the replenishment.
• Frontal window indicates refill time. |
|
|
|
|
|
| |
*
Operation |
|
| |
Pull visible toilet paper, at your own convenience.
|
|
|
|
|
|
|
