Grab Bars | Hand Dryers | Toilet Paper Dispenser | Hair Dryers | Paper Towel Dispenser | Hotel Accessories
Soap Dispensers | Waste Receptacle | -
  » Straight  
    + BR0300CS  
    + BR0400CS  
    + BR0600CS  
    + BR0750CS  
    + BR0300  
    + BR0400  
    + BR0600  
    + BR0750  
    + BR0300RB  
    + BR0400RB  
    + BR0750RB  
  » Swing-up  
  » Double angled  
  » 90º angled  
  » Wall to wall  
  » With three support points  
  » Wall to the floor  
  » Wall to the floor with three support points  
  » 130º angled  
 

General Catalogue
 
     
 
Mediclinics, S.A.
Industria, 54
E-08025 BARCELONA
Tel.: +34 93 446 47 00
Fax: +34 93 348 10 39

export@mediclinics.com

 
     
  Code: BR0400 - Straight bar steel white epoxy  

Data Sheet (67 KB)
CAD Drawing (79 KB)
High Resolution Picture (35 KB)
   
Print

 
  * General Description  
 
• Straight grab bar, steel white epoxy coated, for an horizontal, vertical or slanting installation.
• Suitable for bathrooms specific for invalids, elderly people or the handicapped.
• Suitable to achieve barrier-free accessibility in bathrooms and public spaces.
• Model suitable for public use.
• Highest durability and rusting resistance.
 
  * Components and Materials  
 
• Steel bar, 1,5 mm thick and Ø 32 mm (outer diameter), white epoxy-polyester coated after antioxidant treatment. The bending process guarantees the uniformity of the diameter along the bends.
• Steel mounting flange, 2 units, 3 mm thick and Ø 71,5 mm, white epoxy-polyester coated after antioxidant treatment. Incorporates 3 screws holes of Ø 6 mm for mounting on the wall.
 
  * Technical Specifications  
 
Recommended installation height 750-915 mm  
  Maximum force supported (*) 4003   N
Maximum weight supported (*) 408   Kg
  Distance between bar and wall 38   mm
Total maximum length 526,5   mm
  Length between flanges’ centres 455   mm
 
     
  * Operation  
  No specific instructions for its use required.
(*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.
 
  * Certificates & Qualifications  
  ISO 9001:2000.  
  * Specification  
  Straight grab bar should be made of steel, 1,5 mm thick and Ø 32 mm (outer diameter), white epoxy-polyester coated after antioxidant treatment. The bending process should guarantee the uniformity of the diameter along the bends. The bar should have two steel mounting flanges, 3 mm thick and Ø 71,5 mm, white epoxy-polyester coated after antioxidant treatment. Each mounting flange should incorporate 3 screws holes of Ø 6 mm for mounting on the wall. The grab bar should be able to support a maximum force of 4.003 N and a weight of 408 Kg. Overall maximum dimensions of the bar shall be 526,5 mm and between flanges’ centres 455 mm.

Straight grab bar shall be model BR0400, white epoxy coated, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.
 
* Installation  
 
 
Web design by NeoInteractiva