|
 |
|
|
| |
Code:
BR0750CS -
Straight bar stainless steel AISI 304 satin finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Straight grab bar, stainless steel AISI 304 satin finish, for an horizontal, vertical or slanting installation.
• With snap flange cover.
• Suitable for bathrooms specific for invalids, elderly people or the handicapped.
• Suitable to achieve barrier-free accessibility in bathrooms and public spaces.
• Model suitable for public use.
• Highest durability and rusting resistance. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Stainless steel AISI 304 bar, 1,5 mm thick and Ø 32 mm (outer diameter), satin finish. The bending process guarantees the uniformity of the diameter along the bends.
• Stainless steel AISI 304 mounting flange, 2 units, 3 mm thick. Incorporates 2 screws holes of Ø 6,5 mm for mounting on the wall.
• Stainless steel AISI 304 snap flange cover, 2 units, satin finish, 0,8 mm and Ø 81 mm. |
|
|
|
|
|
| |
*
Operation |
|
| |
No specific instructions for its use required.
(*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.
|
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000. |
|
|
|
|
|
| |
*
Specification |
|
| |
The straight grab bar should be made of stainless AISI 304, 1,5 mm thick and Ø 32 mm (outer diameter), satin finish. The bending process should guarantee the uniformity of the diameter along the bends. The bar should incorporate two stainless steel AISI 304 mounting flanges, 3 mm thick. Each mounting flange should incorporate 2 screws holes of Ø 6,5 mm for mounting on the wall. The bar should be equipped with 2 stainless steel AISI 304 snap flange covers, satin finish, 0,8 mm and Ø 81mm. The grab bar should be able to support a maximum force of 4.003 N and a weight of 408 Kg. Overall maximum dimensions of the bar shall be 841 mm and between flanges’ centres 760 mm.
Straight grab bar shall be model BR0750CS, stainless steel AISI 304 satin finish, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
*
Installation |
|
| |
|
|
|
|
|
|
|
