|
 |
|
|
| |
Code:
BG0800CS -
Swing up bar, vertical turn stainless steel AISI 304 satin finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Swing up grab bar, vertical turn, with holder for paper roll, stainless steel AISI 304, satin finish, to place next to the toilet.
• Suitable for bathrooms specific for invalids, elderly people or the handicapped.
• Suitable to achieve barrier-free accessibility in bathrooms and public spaces.
• Model suitable for public use.
• Highest durability and rusting resistance. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Stainless steel AISI 304, 1,5 mm thick and Ø 32 mm (outer diameter), satin finish. The bending process guarantees the uniformity of the diameter along the bends. The swinging point is reinforced by means of a double tube. A hook bar for paper roll holding is incorporated, as well as a safety anchoring system that blocks the bar in the vertical position and avoids it falling down accidentally.
• Stainless steel AISI 304 mounting flange, 3 mm thick, satin finish. Incorporates 6 countersunk screws holes of Ø 6,5 mm for mounting on the wall. |
|
|
|
|
|
| |
*
Operation |
|
| |
No specific instructions for its use required.
(*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.
The bar is manually changed from vertical to horizontal position. This is achieved by slightly lifting the bar in order to free the safety anchor that blocks the bar in the vertical position. To change from horizontal to vertical position, just lift the bar until this remains blocked. |
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000. |
|
|
|
|
|
| |
*
Specification |
|
| |
Swing up grab bar, vertical turn, should be equipped with holder for paper roll. It should be made of stainless steel AISI 304, satin finish 1,5 mm thick and Ø 32 mm (outer diameter). All joints and supports should be contour-cut and arc-welded in argon atmosphere. The bending process of the bar should be guarantee the uniformity of the diameter along the bends. The swinging point should be reinforced by means of a double tube. A hook bar for paper roll holding should be incorporated, as well as a safety anchoring system that blocks the bar in the vertical position and avoids it falling down accidentally. The mounting flange should be made of stainless steel AISI 304, 3 mm thick, satin finish, incorporating 6 countersunk screws holes of Ø 6,5 mm for mounting on the wall. The grab bar should be able to support a maximum force of 1.112 N and a weight of 113 Kg. Overall dimensions of the flange shall be 300 mm x 100 mm. Total length of the bar should be 735 mm.
Swing up grab bar shall be model BG0800CS, stainless steel AISI 304, satin finish, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
*
Installation |
|
| |
|
|
|
|
|
|
|
