|
 |
|
|
| |
Code:
BGC710 -
Wall to floor swing up bar, vertical turnSteel white epoxy |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Wall to floor swing up grab bar, vertical turn, with holder for paper roll, steel white epoxy coated, to place next to the toilet.
• Suitable for bathrooms specific for invalids, elderly people or the handicapped.
• Suitable to achieve barrier-free accessibility in bathrooms and public spaces.
• Highest durability and rusting resistance. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Steel bar, 1,5 mm thick and Ø 32 mm (outer diameter), white epoxy-polyester coated after antioxidant treatment. The bending process guarantees the uniformity of the diameter along the bends. The swinging point is reinforced by means of a double tube. A hook bar for paper roll holding is incorporated, as well as a safety anchoring system that blocks the bar in the vertical position and avoids it falling down accidentally.
• Steel column, white epoxy-polyester coated.
• Steel mounting on the floor flange, 5 mm thick, white epoxy coated. Incorporates 4 screws holes of Ø 10 mm for mounting on the floor.
• Steel mounting on the wall flange, 2 mm thick, white epoxy coated. Incorporates 2 screws holes of Ø 8.5 mm for mounting on the wall.
• All the joining points and supports are made with TIG welding system. |
|
|
|
|
|
| |
*
Operation |
|
| |
No specific instructions for its use required.
(*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.
The bar is manually changed from vertical to horizontal position. This is achieved by slightly lifting the bar in order to free the safety anchor that blocks the bar in the vertical position. To change from horizontal to vertical position, just lift the bar until this remains blocked. |
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000. |
|
|
|
|
|
|
