90º angled bar steel white epoxy


	» Straight

	» Swing-up

	» Double angled

	» 90º angled

	+ BAI090

	+ BAI090CS

	+ BAD090

	+ BAD090CS

	» Wall to wall

	» With three support points

	» Wall to the floor

	» Wall to the floor with three support points

	» 130º angled

	General Catalogue

	Mediclinics, S.A. Industria, 54 E-08025 BARCELONA Tel.: +34 93 446 47 00 Fax: +34 93 348 10 39 export@mediclinics.com


	Code: BAD090 - 90º angled bar steel white epoxy

See dimensions

	* General Description
	• Grab bar, 90º angle to the right, steel white epoxy coated, for showers, baths and changing rooms. • Suitable for bathrooms specific for invalids, elderly people or the handicapped. • Suitable to achieve barrier-free accessibility in bathrooms and public spaces. • Model suitable for public use. • Highest durability and rusting resistance.

	* Components and Materials
	• Steel bar, 1,5 mm thick and Ø 32 mm (outer diameter), white epoxy-polyester coated after antioxidant treatment. The bending process guarantees the uniformity of the diameter along the bends. • Steel mounting flange, 3 units, 3 mm thick and Ø 71,5 mm, white epoxy-polyester coated after antioxidant treatment. Incorporates 3 screws holes of Ø 6 mm for mounting on the wall.

* Technical Specifications

	Recommended installation height	750-915 mm
	Maximum force supported (*)	4003 N
	Maximum weight supported (*)	408 Kg
	Distance between bar and wall	38 mm
	Length of the long section (maximum distance)	855,5 mm
	Length of the short section (maximum distance)	446,5 mm
	Length of the long section (between flange and bend centres)	700 mm
	Length of the short section (between flange and bend centres)	375 mm

	* Operation
	No specific instructions for its use required. (*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.

	* Certificates & Qualifications
	ISO 9001:2000.

	* Specification
	90º angled to the right grab bar should be made of steel, 1,5 mm thick and Ø 32 mm (outer diameter), white epoxy-polyester coated after antioxidant treatment. The bending process should guarantee the uniformity of the diameter along the bends. The bar should have three steel mounting flanges, 3 mm thick and Ø 71,5 mm, white epoxy-polyester coated after antioxidant treatment. Each mounting flange should incorporate 3 screws holes of Ø 6 mm for mounting on the wall. The grab bar should be able to support a maximum force of 4.003 N and a weight of 408 Kg. The maximum length of the long section should be 855,5 mm and the maximum length of the short section should be 446,5 mm 90º angled to the right grab bar shall be model BAD090, white epoxy coated, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.