90º angled bar stainless steel AISI 304 satin finish


	» Straight

	» Swing-up

	» Double angled

	» 90º angled

	+ BAI090

	+ BAI090CS

	+ BAD090

	+ BAD090CS

	» Wall to wall

	» With three support points

	» Wall to the floor

	» Wall to the floor with three support points

	» 130º angled

	General Catalogue

	Mediclinics, S.A. Industria, 54 E-08025 BARCELONA Tel.: +34 93 446 47 00 Fax: +34 93 348 10 39 export@mediclinics.com


	Code: BAD090CS - 90º angled bar stainless steel AISI 304 satin finish

See dimensions

	* General Description
	• Grab bar, 90º angle to the right, stainless steel AISI 304 satin finish, for showers, baths and changing rooms. • With snap flange cover. • Suitable for bathrooms specific for invalids, elderly people or the handicapped. • Suitable to achieve barrier-free accessibility in bathrooms and public spaces. • Model suitable for public use. • Highest durability and rusting resistance.

	* Components and Materials
	• Stainless steel AISI 304 bar, 1,5 mm thick and Ø 32 mm (outer diameter), satin finish. The bending process guarantees the uniformity of the diameter along the bends. • Stainless steel AISI 304 mounting flange, 3 units, 3 mm thick. Incorporates 2 screws holes of Ø 6,5 mm for mounting on the wall. • Stainless steel AISI 304 snap flange cover, 3 units, satin finish, 0,8 mm and Ø 81 mm.

* Technical Specifications

	Recommended installation height	750-915 mm
	Maximum force supported (*)	4003 N
	Maximum weight supported (*)	408 Kg
	Distance between bar and wall	38 mm
	Length of the long section (maximum distance)	865 mm
	Length of the short section (maximum distance)	4556 mm
	Length of the long section (between flange and bend centres)	700 mm
	Length of the short section (between flange and bend centres)	375 mm

	* Operation
	No specific instructions for its use required. (*) NOTE: The load that the bar withstands depends on the type of the wall and the wall plugs used. Nuts and bolts are not included. The use of stainless steel screws is recommended.

	* Certificates & Qualifications
	ISO 9001:2000.

	* Specification
	90º angled to the right grab bar should be made of stainless AISI 304, 1,5 mm thick and Ø 31 mm (outer diameter), satin finish. The bending process should guarantee the uniformity of the diameter along the bends. The bar should incorporate three stainless steel AISI 304 mounting flanges, 3 mm thick and Ø 75 mm. Each mounting flange should incorporate 2 screws holes of Ø 6,5 mm for mounting on the wall. The bar should be equipped with 3 stainless steel AISI 304 snap flange covers, satin finish, 0,8 mm and Ø 80 mm. The grab bar should be able to support a maximum force of 4.003 N and a weight of 408 Kg. The maximum length of the long section should be 865 mm and the maximum length of the short section should be 456 mm 90º angled to the right grab bar shall be model BAD090CS, stainless steel AISI 304 satin finish, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.