Waste receptacle with self closing lid stainless steel AISI 304 satin finish


	» With automatic return lid

	+ PP0065

	+ PP0065C

	+ PP0065CS

	+ PP0080

	+ PP0080C

	+ PP0080CS

	+ PP0985

	+ PP0987

	+ PP0986

	+ PP0988

	» Without closing lid

	» Pedal bins - round shape

	» Pedal bins - square shape

	» Sanitary napkin disposal bin - with lid

	General Catalogue

	Mediclinics, S.A. Industria, 54 E-08025 BARCELONA Tel.: +34 93 446 47 00 Fax: +34 93 348 10 39 export@mediclinics.com


	Code: PP0080CS - Waste receptacle with self closing lid stainless steel AISI 304 satin finish

See dimensions

	* General Description
	• Waste receptacle with self-closing lid, 80 L of capacity, wall mounted or floor standing, stainless steel AISI 304 satin finish. • Suitable for lavatories and in-doors public areas with very high traffic. • Model suitable for public use. • When set in a lavatory, it generally goes along with a paper tissue dispenser and complemented by a warm air hand dryer.

	* Components and Materials
	• Stainless steel AISI 304 body, 0,8 mm thick, satin finish. Capacity 80 L. For standing on the floor or wall mounting by means of 3 slot holes drilled on the back of the appliance. • Stainless steel AISI 304 top, 1 mm thick, satin finish. • Stainless steel AISI 304 lid, 1,2 mm thick, satin finish, manually operated. It incorporates impact and noise dampening rubber bumpers, as well as a spring for automatic return. • Retaining system on the inside of the body to secure the disposable waste bag. • Black thermoplastic feet, 4 units, that isolates the bottom of the waste receptacle from moisture.

* Technical Specifications

	* Operation
	Swing the lid by hand until there is enough room to place the waste into the receptacle.

	* Specification
	80 L waste receptacle with self-closing lid should be made of stainless steel AISI 304 satin finish. The body should be made of stainless steel AISI 304, 0,8 mm thick, satin finish and it should incorporate a retaining system on the inside to secure the disposable waste bag. The waste receptacle should be suitable for standing on the floor or wall mounting by means of 3 slot holes drilled on the back of the appliance. The top should be made of stainless steel AISI 304, 1 mm thick, satin finish. The lid should be made of stainless steel AISI 304, 1,2 mm thick, satin finish, manually operated incorporating impact and noise dampening rubber bumpers as well as a spring for automatic return. The waste receptacle should be provided with 4 feet made of black thermoplastic, that isolates the bottom of the waste receptacle from moisture. Overall dimensions shall be 820 x 354 x 300 mm. 80 L waste receptacle with self-closing lid shall be model PP0080CS, stainless steel AISI 304 satin finish, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.


	Nº dryers to be fitted:
	In toilet areas with a normal frequency of use and only one wash-basin: 1 dryer. In toilet areas with a normal frequency of use and more than one wash-basin: 1 dryer for each 2 wash-basins. 1 row of 4 wash basins: 2 dryers; 1 row of 6 wash basins: 3 dryers; 1 row of 8 wash basins: 4 dryers. In toilet areas with high traffic and more than one wash-basin: 2 dryers for each 3 wash-basins. 1 row of 4 wash basins: 3 dryers; 1 row of 6 wash basins: 4 dryers; 1 row of 8 wash basins: 5 dryers.

	Ideal Location:
	Between the wash-basin and exit. It is not recommended to install dryer between wash-basins, next to urinals, lavatories and showers. If installing automatic dryers over marble surface or ledge, the minimum distance from the dryer to the ledge must be 400 mm. It is recommended that hand dryers be distributed throughout the washroom area to avoid overcrowding.

	Recommended heights Distance from the floor


	Mediclinics, S.A., reserves the right to make changes and/or modifications to the products and their specifications without prior notice.