|
 |
|
|
| |
Code:
AI0115C -
Towel ring stainless steel AISI 304 bright finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Towel ring, stainless steel AISI 304, bright finish, trapezoid form, for mounting on the wall.
• Suitable for the hotel sector, for fitting out the bathrooms in the hotel rooms.
• Model suitable for public use.
• With no removable components.
• It normally goes along with a stainless steel soap dispenser. |
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Stainless steel AISI 304 ring, trapezoid form, tube of Ř 6 mm, bright finish.
• Stainless steel AISI 304 arm and snap flange cover, 0.8 mm thick, bright finish. Mounting on the flange by means of a keep pin. Completely welded construction.
• Stainless steel AISI 304 mounting flange, 1,6 mm thick. Mounting on the wall by means of two screws. |
|
|
|
|
|
| |
*
Operation |
|
| |
No specific instructions for its use required. |
|
|
|
|
|
| |
* Certificates & Qualifications |
|
| |
ISO 9001:2000. |
|
|
|
|
|
| |
*
Specification |
|
| |
Towel ring should be stainless steel AISI 304 bright finish, for mounting on the wall, with a ring, trapezoid form, made of tube of Ř 6 mm. Arm and snap flange cover should be made of stainless steel AISI 304, 0,8 mm thick, bright finish, mounting on the flange by means of a keep pin. It should be a completely welded construction. Mounting flanges should be made of stainless steel AISI 304, 1,6 mm thick and to be mounted on the wall by means of two screws. Overall dimensions shall be 130 x 132 x 60 mm.
Towel ring, trapezoid from, shall be model AI0115C, stainless steel AISI 304 bright finish, of Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
|
|
|
|
|
