|
 |
|
|
| |
Code:
M99A -
Hand dryer Optima sensor operated white epoxy finish |
|
|
|
|
|
|
|
| |
* General Description |
|
| |
• Warm air hand dryer.
• Sensor operated.
• Suitable for medium facilities.
• Compact appliance.
• Highest durability in its class.
• It normally goes along with a soap dispenser.
|
|
|
|
|
|
| |
*
Components and Materials |
|
| |
• Steel one-piece high quality and high impact white epoxy coated cover, 1,9 mm thick. Cover fixed to the base by means of 4 Allen head screws.
• Engineering thermoplastic ABS UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting.
• Induction motor, 2.800 rpm, maintenance-free and high durability, incorporates a safety thermostat and a self-resetable thermal cut-off at 130 ºC.
• PP UL94-V0 with single inlet fan wheel.
• Waved wire NiCr 40 heating element that incorporates a self-resetable thermal cut-off at 70 ºC.
• Two distances (15/25 cm) IR electronic detection sensor.
• Zamak air outlet grill.
|
|
|
|
|
|
| |
*
Operation |
|
| |
Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.
|
|
|
|
|
|
| |
*
Specification |
|
| |
Surface mounted vandal resistant hand dryer shall be manufactured with steel one-piece high quality and high impact white epoxy coated cover, 1,5 mm thick, fixed to the base by means of 4 Allen head screws. The back base shall be fire resistant plastic ABS UL 94-V0 and with 4 holes Ø 8 mm for wall mounting. The dryer shall be activated through an infrared electronic sensor and shall automatically turn off two second after hands are removed. The maintenance-free induction motor shall be 140 W, 2.800 rpm. and incorporate a self-resetable thermal cut-off which will disconnect at 130ºC. The undulated NiCr 40 heating element should incorporate a self-resetable thermal cut-off which will disconnect at 70ºC. The PP UL 94-V0 fan wheel should have a single inlet and the fan scroll shall be made of a fire resistant plastic ABS UL 94-V0. Dryer shall deliver 240 m3/h of air at 52 ºC and 65 Km/h velocity during user controlled drying cycle. The dryer shall have a total power of 1.640 Watts with a consumption of 7 A. Noise level should be 60 dB at 2 m distance. Protection level against water splashes should be rating IP23. Overall dimensions shall be 302 x 255 x 140 mm. Unit should be VDE approved and CE marked and comply with electrical safety directives 73/23/CEE & 93/68/CEE and electro-magnetic compatibility directives 89/336/CEE & 92/31/CEE.
Surface mounted hand dryer shall be model M99A, sensor operated, steel, white epoxy coated cover, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain.
|
|
|
|
|
|
|
*
Installation |
|
| |
|
|
|
|
|
|
|
