|
 |
 |
 |
| |
Code:
M04A -
Hand dryer Smartflow sensor operated white ABS |
|
 |
 |
 |
 |
 |
 |
| |
* General Description |
|
| |
• Warm air hand dryer.
• Sensor operated by hand approximation.
• Suitable for medium traffic facilities.
• Compact, small size.
• Highest durability in its class.
• It normally goes along with a soap dispenser. |
|
 |
|
|
 |
| |
*
Components and Materials |
|
| |
• White ABS thermoplastic one-piece cover, 3 mm thick. Cover fixed to the base by means of 2 metal sheet screws.
• Thermoplastic PP + talcum base, with 4 Ø 6 mm holes for wall mounting (screws and wall plugs are provided).
• Universal brush motor, 15.000 rpm, class B, includes a self-resetable thermal cut-off at 100 ºC.
• PP UL94-V0 helicoidal fan wheel.
• Waved Ni-Cr wire heating element that incorporates a self-resetable thermal cut-off at 95 ºC.
• Adjustable (5-20 cm) IR electronic detection sensor.
• IR Sensor with PC viewing screen. |
|
 |
|
|
 |
| |
*
Operation |
|
| |
Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands be kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow. |
|
 |
|
|
 |
| |
*
Specification |
|
| |
Surface mounted hand dryer shall be fabricated with one-piece 3 mm thick high-quality white ABS thermoplastic fixed to the base by means base of 2 metal sheet screws. The back base shall be thermoplastic PP + talcum base, with 4 Ø 6 mm holes for wall mounting (screws and wall plugs are provided). The dryer shall be activated through an adjustable (5-20 cm) IR electronic detection sensor and shall automatically turn off two second after hands are removed. Sensor should have a PC viewing screen. Shall have an universal brush motor, 15.000 rpm, class B, including a self-resetable thermal cut-of at 100 ºC. The waved Ni-Cr wire heating element shall incorporates a self-resetable thermal cut-off at 95 ºC. The fan wheel shall be PP UL94-V0 helicoidal. Dryer shall deliver 96 m3/h of air at 47 ºC and 85 Km/h velocity during user controlled drying time. The dryer shall have a total power of 1.100 Watts with a consumption of 4,8 A. Noise level should be 60 dB at 2 m distance. Protection level against water splashes should be rating IP23. Overall dimensions shall be 258 x 145 x 138 mm. Unit should be VDE approved and CE marked and comply with electrical safety directives 73/23/CEE & 93/68/CEE and electro-magnetic compatibility directives 89/336/CEE & 92/31/CEE.
Surface mounted hand dryer shall be model M04A sensor operated white ABS thermoplastic cover, manufactured by Mediclinics S.A., C/ Industria 54, E-08025 Barcelona, Spain. |
|
 |
|
|
 |
|
*
Installation |
|
| |
|
|
 |
|
|
 |
|